85
9 Online parameter (setup only)
9 Onlin e parameter (setup o nly)
The functions described in this section are only configured or executed in the setup program. An active
connection between the setup program and the device is required for this.
The default settings are shown in bold in the tables.
9.1 Fine adjustment
You can use this function to correct the measured values of the analog input. In contrast to measured
value offsetting, which is used to specify a constant correction value for the entire characteristic line, fine
adjustment can also be used to change the gradient of the characteristic line.
This function is identical to the fine adjustment in the device (Configuration > Analog input > Fine adjust-
ment).
Description of the parameters and the function:
chapter 7.5 "Analog input", page 50
9.2 Approval of extra codes
You can use this function to activate additional functions (extra codes) for the devices via the setup pro-
gram.
To Next Page
Loading...
