2 General information
10
Diaphragm seal (option)
Available as an accessory: see data sheets 409770 to 409786.
Diaphragm seals are used for adjusting to particular applications if conventional pressure connections
cannot be used.
CAUTION!
Diaphragm seals are installed by default and must not be removed from the device!
Valve manifolds (option)
Available as an accessory: see data sheet 409706.
JUMO PEKA – Hygienic process connection (option)
Available as an accessory: see data sheet 409711.
Additional JUMO accessories (option)
Additional accessories available: see data sheet 409700 (shut-off valves, measurement device holders,
transition pieces, seals, etc.).
To Next Page
