JUMO dTRANS p20 - Device Configuration; Data Flow Overview

55
8 Configuration
8 Configu ration
8.1 Data flow diagram
Display
selected
values
Pressure value A/D
Linearized pressure
Filter/ attenuation
P4 Sec
Zero point adjustment P7 Zero P15 Off
Density correction P0 Den
Measuring range P5 RS P6 RE P2 mA P3 mA
Characteristic line P11 Chr
Current output P9 Err P8 mA
Current value D/A
Temperature value A/D
Linearized temperature
Temperature unit
P14 Unit
Drag indicator P min P max
relevant for output signal mA relevant for Display fixed values, not changeable
Fixed values without configuration possibility P10 Key P13 SWV P20 h
Scaling P16 SCS P17 SCE P18 SCD P19 %
Pressure unit P1 unit
Temperature value
Pressure min/ma
x
Scaled output
Pressure value
Current output