55
9 Evaluating data with a PC
TAG_*.CSV The file contains the TAG names and the limits. As standard, it is available in
the write/read mode and can be edited directly on the TDA.
The file contains the following data:
Writing directly to the file on the TDA can be prevented through the
parameter (3) “Lock menu Fn2”. If parameter (3) is set, the file
receives the “Read only” attribute.
v See “Lock” on Page 51.
Name Value range factory-set
TAG number 1 to 99 -
TAG name 11 characters
v Chapter 4.1
TAG01 to TAG99
Upper limit
(Hi Limit)
identical with the
upper range end
0.0°C or 32°F
Lower limit
(Low Limit)
identical with the
lower range end
0.0°C or 32°F
To Next Page
Loading...
