To Next Page
K
keith91Aug 10, 2025
What to do if Jungheinrich AMX Inox Forklifts load cannot be lifted?
- NNatasha WrightAug 10, 2025
If your Jungheinrich forklifts load cannot be lifted, several factors could be at play. The hydraulic oil level might be too low, so start by checking that. There could also be air in the hydraulic system; try pumping the load handler fully upwards to bleed the system. Ensure the handle is correctly positioned in the “Lift” direction, and that the battery is adequately charged. Also, check the fuses. If seals are leaking or valves aren't closing, it’s best to inform the manufacturer’s service department.
General
