Jungheinrich AMX Inox - Starting up the Truck

1205.GB
E 4
3 Starting up the truck
F
Before the truck can be commissioned, operated or a load unit lifted, the driver must
ensure that there is nobody within the hazardous area.
Checks and operations to be performed before starting daily work
– Inspect the entire truck (especially the wheels and the load handler) for visible signs
of damage.
AMX-E only:
– Check whether charge connector is connected (6). Remove if necessary.
Z
The battery discharge monitor (7) shows the available battery capacity.
The truck is now operational.
6
7
1205.GB
E 4
3 Starting up the truck
F
Before the truck can be commissioned, operated or a load unit lifted, the driver must
ensure that there is nobody within the hazardous area.
Checks and operations to be performed before starting daily work
– Inspect the entire truck (especially the wheels and the load handler) for visible signs
of damage.
AMX-E only:
– Check whether charge connector is connected (6). Remove if necessary.
Z
The battery discharge monitor (7) shows the available battery capacity.
The truck is now operational.
6
7