Jungheinrich AMX Inox - Using the Truck for the First Time

1205.GB
C 2
3 Using the truck for the first time
To prepare the truck after delivery or transport the following tasks must be carried out:
– Check the truck for completeness and satisfactory condition of the equipment.
– Install battery (where required). Do not damage battery cables (only AMX-E).
– Charge the battery (only AMX-E, see Chapter D).
– Commission the truck in accordance with instructions (see Chapter E).
Z
When the truck is parked, the surface of the tyres will flatten. The flattening will
disappear after a short period of operation.
1205.GB
C 2
3 Using the truck for the first time
To prepare the truck after delivery or transport the following tasks must be carried out:
– Check the truck for completeness and satisfactory condition of the equipment.
– Install battery (where required). Do not damage battery cables (only AMX-E).
– Charge the battery (only AMX-E, see Chapter D).
– Commission the truck in accordance with instructions (see Chapter E).
Z
When the truck is parked, the surface of the tyres will flatten. The flattening will
disappear after a short period of operation.