Jungheinrich AMX Inox - Maintenance Checklist AMX

0708.GB
F 4
4 Maintenance Checklist AMX
Maintenance intervals
Standard =
t
WA B C
Cold Store =
k
Chassis/
Design:
1.1 Check all load bearing components for damage t
1.2 Check screw connections t
Wheels: 2.1 Check wheels for wear and damage t
2.2 Check suspension and attachment t
Steering: 3.1 Check the steering play t
Hydraulic
System:
5.1 Test operation t
5.2 Check unions and connections for leaks and
and check damage
t
5.3 Make sure hydraulic unit is sealed, check for damage
and test attachment
t
5.4 Check oil level t
5.5 Replace hydraulic oil and filter cartridge t
5.6 Test pressure relief valves t
Lift
mechanism:
8.1 Check operation, wear and setting t
8.2 Check the load wheels and plunger rods t
8.3 Check forks and fork carriage for wear and
damage
t
Lubrication: 9.1 Lubricate truck in accordance with Lubrication
Schedule.
t
Demonstration: 11.1 Test run with rated load t
11.2 After completing maintenance, present the truck to the
supervisor
t
0708.GB
F 4
4 Maintenance Checklist AMX
Maintenance intervals
Standard =
t
WA B C
Cold Store =
k
Chassis/
Design:
1.1 Check all load bearing components for damage t
1.2 Check screw connections t
Wheels: 2.1 Check wheels for wear and damage t
2.2 Check suspension and attachment t
Steering: 3.1 Check the steering play t
Hydraulic
System:
5.1 Test operation t
5.2 Check unions and connections for leaks and
and check damage
t
5.3 Make sure hydraulic unit is sealed, check for damage
and test attachment
t
5.4 Check oil level t
5.5 Replace hydraulic oil and filter cartridge t
5.6 Test pressure relief valves t
Lift
mechanism:
8.1 Check operation, wear and setting t
8.2 Check the load wheels and plunger rods t
8.3 Check forks and fork carriage for wear and
damage
t
Lubrication: 9.1 Lubricate truck in accordance with Lubrication
Schedule.
t
Demonstration: 11.1 Test run with rated load t
11.2 After completing maintenance, present the truck to the
supervisor
t