To Next Page

To Previous Page

0708.GB

F 2

Electrical System: Only suitably trained personnel may operate on the truck’s

electrical system. Before working on the electrical system, take all precautionary

measures to avoid electric shocks. For battery-operated trucks, also de-energise the

truck by removing the battery connector.

Welding: To avoid damaging electric or electronic components, remove these from

the truck before performing welding operations.

Settings: When repairing or replacing hydraulic, electric or electronic components or

assemblies, always note the truck-specific settings.

Tyres: The quality of tyres affects the stability and performance of the truck. When

replacing wheels/rollers fitted at the factory, only use manufacturer’s original spare

parts. Otherwise the truck's rated performance cannot be ensured.

When changing wheels and tyres, ensure that the truck does not slew (e.g. when

replacing wheels always left and right simultaneously).

Hydraulic hoses: The hoses must be replaced every six years. When replacing

hydraulic components, also replace the hoses in the hydraulic system.