Jungheinrich ETM/V 214 User Manual

1003.GB
E 16
4.3 Fork Adjustment
F
In order to securely position a load the
forks should be set as far as possible
apart from each other and centrally
aligned with the truck. The load centre of
gravity must lie between the forks.
– Tilt the locating lever (27) up.
– Push the forks (28) to the correct
position on the fork carriage.
– Tilt the locating lever down until the
locating pin engages in a slot.
4.4 Picking Up and Depositing a Load
M
Before a load is lifted the driver must
ensure that it is arranged on the pallet in
accordance with regulations and the
truck capacity is not exceeded.
– Position the forks as far as possible
underneath the load.
28
27
29
1003.GB
E 16
4.3 Fork Adjustment
F
In order to securely position a load the
forks should be set as far as possible
apart from each other and centrally
aligned with the truck. The load centre of
gravity must lie between the forks.
– Tilt the locating lever (27) up.
– Push the forks (28) to the correct
position on the fork carriage.
– Tilt the locating lever down until the
locating pin engages in a slot.
4.4 Picking Up and Depositing a Load
M
Before a load is lifted the driver must
ensure that it is arranged on the pallet in
accordance with regulations and the
truck capacity is not exceeded.
– Position the forks as far as possible
underneath the load.
28
27
29

Jungheinrich ETM/V 214 Specifications

General

Brand	Jungheinrich
Model	ETM/V 214
Category	Forklifts
Language	English