Jungheinrich ETM/V 214 User Manual

1003.GB
E 32
7 Operator Keypad (CANCODE) (o)
The keypad consists of 10 digit keys, one set key
and one extra key o
The o key indicates the operational status via a
red/ green LED.
It has the following functions:
– Code key function (starting the truck).
7.1 Code Key
After entering the correct code the truck is ready for use. It is possible to allocate an
individual code to each truck, driver or group of drivers.
Z
When delivered from the factory the operational codes are shown on the driver
display unit and CANCODE (o) (factory setting 2-5-8-0) or for the on board computer
(o) (factory setting ( 1-4-0-3-7) on a sticker.
M
When using the truck for the first time change the mast and operator code!
1 2 3
4 5 6
7 8 9
0
Set
1003.GB
E 32
7 Operator Keypad (CANCODE) (o)
The keypad consists of 10 digit keys, one set key
and one extra key o
The o key indicates the operational status via a
red/ green LED.
It has the following functions:
– Code key function (starting the truck).
7.1 Code Key
After entering the correct code the truck is ready for use. It is possible to allocate an
individual code to each truck, driver or group of drivers.
Z
When delivered from the factory the operational codes are shown on the driver
display unit and CANCODE (o) (factory setting 2-5-8-0) or for the on board computer
(o) (factory setting ( 1-4-0-3-7) on a sticker.
M
When using the truck for the first time change the mast and operator code!
1 2 3
4 5 6
7 8 9
0
Set

Jungheinrich ETM/V 214 Specifications

General

Brand	Jungheinrich
Model	ETM/V 214
Category	Forklifts
Language	English