To Next Page

To Previous Page

1003.GB

F 8

6 Maintenance

6.1 Prepare truck for maintenance and repairs

All necessary safety measures must be implemented to avoid accidents during repair

and maintenance work. Park truck safely (see Chapter E).

– Remove battery plug (1).

– This ensures that the truck cannot be accidentally put into operation.

When working under raised forks or a raised truck ensure that the truck cannot lower,

tip over or slide. When lifting the truck, follow the regulations specified in "Transport

and Commissioning".

When work is carried out on the safety brake, ensure that the truck cannot roll away.

6.2 Safety Belt Maintenance (o)

Each day, before using the truck the driver shall check the condition and function of

the safety belt. Only regular checking ensures that faults are avoided.

– Remove the belt completely and check for fraying.

– Check the belt lock and make sure the belt enters the reel mechanism correctly.

o Test the automatic interlock:

– Park truck in horizontal condition.

– Pull heavily on the belt.

The interlock should prevent the belt from coming out.

Do not operate the machine with a defective safety belt. Replace the belt

immediately!