Jungheinrich ETM/V 214 User Manual

1003.GB
E 22
F
When steering in the standing position the drive wheel tyre is under tension. A
correcting moment can be created by releasing the Allen screw.
M
When the truck has reached a safe position return the brake system to operational
condition! The truck must not be parked with the brakes released.
– Remove the Allen screw from the engine.
– Replace the protective cover.
– Remove the locking bolts for the magnetic brake and screw into the drive plate.
– Assemble seat hood (3) (3 fixing screws)
– Re-connect the fan
– Push driver’s seat along the guide and position it.
1003.GB
E 22
F
When steering in the standing position the drive wheel tyre is under tension. A
correcting moment can be created by releasing the Allen screw.
M
When the truck has reached a safe position return the brake system to operational
condition! The truck must not be parked with the brakes released.
– Remove the Allen screw from the engine.
– Replace the protective cover.
– Remove the locking bolts for the magnetic brake and screw into the drive plate.
– Assemble seat hood (3) (3 fixing screws)
– Re-connect the fan
– Push driver’s seat along the guide and position it.

Jungheinrich ETM/V 214 Specifications

General

Brand	Jungheinrich
Model	ETM/V 214
Category	Forklifts
Language	English