19 v1.7 18.06.2020
Power Button
Adjusts the behavior when pressing the power button
Use Power-On delay
Specifies the time in seconds that the power button must be pressed to turn on the
WMT.
Use power button to turn the device off
If the power button is pressed during operation, the WMT switches off.
Use Power-Off delay
Specifies the delay after which the selected action is performed.
If the power button is pressed for more than 5 seconds, the WMT is switched off
(not shut down) independently of the configuration.
These settings are stored permanently in the system controller of the device. A
change of the power options in the operating system concerning the power button
has no influence on the behavior.