24 v1.7 18.06.2020
5. BIOS
By default, the BIOS setup menu, as well as the BIOS One-Time boot menu, is
protected with the default BIOS administrator password “jhwmt”.
When a USB barcode scanner is connected, the standard password can also be
scanned using the following bar code (barcode type: code 128):
To start the BIOS menu, please press the Delete / Return key (external keyboard)
directly after switching on the WMT.
The one-time boot menu can be opened via the ESC key (external keyboard) or via
the “X” front button when the Jungheinrich boot logo is displayed:
„Enter Setup” starts the BIOS setup menu.
5.1 Navigation in BIOS
The front key assignment differs in the BIOS from that in the operating system.
Shift key (SHIFT) for the second key level.
Keep holding the button and then the corresponding
function key can be pressed.
Layer 1:
Cancel the respective action (ESC)
Layer 2:
No function
Layer 1:
Navigate upwards
Layer 2:
Change the tabs to the left
To Next Page
Loading...
Need help?
General
