Figure 50: DC Power Supply Faceplate of a QFX5120-48Y Switch
5—1— ESD grounding pointShunt negative input terminals (+RTN)
6—2— Fault LEDShunt positive input terminals (-48V)
7—3— Output LEDTerminal block
8—4— Input LEDEjector lever
CAUTION: The V+ terminals are shunted internally together, as are the V- terminals.
The same polarity terminal can be wired together from the same source to provide
an additional current path in a higher power chassis. Do not connect the terminals to
different sources. See Figure 51 on page 106.
105
To Next Page
Loading...
