CAUTION: Do not let fiber-optic cable hang free from the connector. Do not allow
fastened loops of cable to dangle, which stresses the cable at the fastening point.
CAUTION: Avoid bending fiber-optic cable beyond its minimum bend radius. An arc
smaller than a few inches in diameter can damage the cable and cause problems that
are difficult to diagnose.
Maintaining Fiber-Optic Cables
IN THIS SECTION
Connecting a Fiber-Optic Cable | 138
Disconnecting a Fiber-Optic Cable | 139
Maintaining Fiber-Optic Cables | 140
Connecting a Fiber-Optic Cable
Before you begin to connect a fiber-optic cable to an optical transceiver installed in a device, ensure that
you have taken the necessary precautions for safe handling of lasers (see “Laser and LED Safety Guidelines
and Warnings” on page 178).
138
To Next Page
Loading...
Need help?
General