Returning a QFX5120 Chassis or Components
IN THIS SECTION
Returning a QFX5120 Switch or Component for Repair or Replacement | 151
Locating the Serial Number on a QFX5120 Switch or Component | 152
Contacting Customer Support to Obtain Return Material Authorization | 154
Packing a QFX5120 Switch or Component for Shipping | 155
Returning a QFX5120 Switch or Component for Repair or Replacement
If you need to return a switch or hardware component to Juniper Networks for repair or replacement,
follow this procedure:
1. Determine the serial number of the chassis if you need to return the switch. If you need to return one
or more components, determine the serial number for each component.
2. Obtain an RMA number from JTAC as described in “Contacting Customer Support to Obtain Return
Material Authorization” on page 154.
NOTE: Do not return any component to Juniper Networks unless you have first obtained an
RMA number. Juniper Networks reserves the right to refuse shipments that do not have an
RMA. Refused shipments are returned to the customer through collect freight.
3. Pack the switch or component for shipping.
For more information about return and repair policies, see the customer support page at
https://www.juniper.net/support/guidelines.html .
151
To Next Page
Loading...
Need help?
General