Juniper SRX300 Series User Manual

Table 44: RS-232 DTE Cable Pinouts for the 1-Port Serial Mini-PIM
Description
LFH-60
PairingDB-25 PinLFH-60 Pin
Frame Ground-115
Transmit Data-260
Receive Data-31
Request to Send-448
Clear to Send-537
Data Set Ready-69
Signal Ground-757
Data Carrier Detect-813
Transmit Clock-1556
Receive Clock-175
Local Loopback-1841
Data Terminal Ready-2033
Terminal Clock-2452
---22 to 21
---18 to 17
Related
Documentation
EIA-530A DTE Cable Pinouts for the 1-Port Serial Mini-Physical Interface Module on
page 56
•
• RS-422/449 (EIA-449) DTE Cable Pinouts for the 1-Port Serial Mini-Physical Interface
Module on page 61
• V.35 DTE Cable Pinouts for the 1-Port Serial Mini-Physical Interface Module on page 64
• X.21 DTE Cable Pinouts for the 1-Port Serial Mini-Physical Interface Module on page 66
RS-422/449 (EIA-449) DCE Cable Pinouts for the 1-Port Serial Mini-Physical Interface
Module
Table 45 on page 60 gives the RS-422/449 DCE cable pinouts.
59Copyright © 2017, Juniper Networks, Inc.
Chapter 10: Serial Mini-Physical Interface Module Cable Specifications

Juniper SRX300 Series Specifications

General

Memory	4 GB
CPU	Intel Atom
Storage	8 GB
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	10% to 90% noncondensing