Juniper SRX300 Series User Manual

Table 5: Interface Port Number Examples (continued)
Interface Number ExampleInterface Type
pt–1/0/0VDSL2
cl–1/0/0
NOTE: The LTE Mini-PIM can be installed in
any of the Mini-PIM slots on the SRX320,
SRX340, SRX345, and SRX550 HM Services
Gateways.
LTE
ge–3/0/0 through ge–3/0/7
NOTE: The SRX550 High Memory Services
Gateway has high gigabit and non-high gigabit
slots.
•
In the high gigabit slot, you can achieve a
maximum bandwidth of 8 gigabits.
•
In the non-high gigabit slot, you can achieve
a maximum bandwidth of 1 gigabit.
8-Port Gigabit Ethernet small form-factor
pluggable (SFP) XPIM
•
SRX550 High Memory Services
Gateway—ge–3/0/0
NOTE: When installing the 16–Port Gigabit
Ethernet XPIM, which uses 2 slots, you must
install it in the 10–Gigabit or 20–Gigabit GPIM
slots:
•
SRX550 High Memory Services
Gateway—Slots 3 and 6, which refer to the
right side bottom two standard slots (slots
3 and 4) ) and the right side top two
standard slots (6 and 8).
16-Port Gigabit Ethernet XPIM
Related
Documentation
SRX300 Series and SRX550 High Memory Services Gateway Mini-Physical Interface
Modules Overview on page 4
•
• SRX300 Series and SRX550 High Memory Services Gateway Gigabit-Backplane
Physical Interface Modules Overview on page 4
SRX300 Series and SRX550 High Memory Services Gateway Interface Modules and
Compatibility
Table 6 on page 8 shows the types of Mini-Physical Interface Modules (Mini-PIMs) with
the SRX Series devices and the Junos OS releases that support them.
7Copyright © 2017, Juniper Networks, Inc.
Chapter 1: SRX Series Services Gateway Interface Modules Support

Juniper SRX300 Series Specifications

General

Memory	4 GB
CPU	Intel Atom
Storage	8 GB
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	10% to 90% noncondensing