Jupiter Fusion Catalyst 4000 User Manual

Chapter 3—Hardware Setup
Fusion Catalyst 4000 Getting Started Guide 9
3. Hardware Setup
This section describes the hardware setup for the Fusion Catalyst 4000
Wall Controller.
3.1 Rack Mount
Mount the Fusion Catalyst System chassis in the 19-inch rack designated
for this system. Refer to the Fusion Catalyst 4000 Hardware Manual
for specific information on installing the chassis in the 19-inch rack. It is
recommended that you have two people working together to install the
Fusion chassis in the 19-inch rack assembly.
3.2 Connecting the System
The following sections describe how to connect the cables to the Fusion
Catalyst 4000 System. Refer to the sections referenced in the Fusion
Catalyst 4000 Hardware Manual for specific information on a hardware
component.
3.2.1 Fusion Catalyst 4000 Connections
1. Ensure that the power switch is off.
2. Connect the power cord to the rear of the Fusion Catalyst 4000
chassis.
3. Connect the keyboard and mouse to the USB ports of the Fusion
Catalyst 4000 chassis.

Jupiter Fusion Catalyst 4000 Specifications

General

Brand	Jupiter
Model	Fusion Catalyst 4000
Category	Controller
Language	English