22
3 Familiarising yourself with the control options
Example: this is how to prepare an Espresso.
Place an Espresso cup under the coffee spout.
ä l Turn the Rotary Switch to the 1 Espresso setting a.
m l Press the Rotary Switch to initiate preparation of the
Espresso.
The 1 Espresso symbol
a will now fl ash, and the pre-set
amount of water will fl ow into the cup.
Drink preparation stops automatically.
You can change both the coffee strength and the amount of
water while your drink is being prepared. These settings are not
saved.
One-off settings during coffee preparation always follow this
model.
During the grinding operation, the light segments above
the Rotary Switch indicate the coffee strength. The coffee
strength can be altered while 1 Espresso or 1 coffee is
being prepared.
The coffee strength options available are as follows:
Coffee strength Shown in symbol display
Mild 1 light segment is illuminated
Normal 2 light segments are illuminated
Strong 3 light segments are illuminated
During the brew operation, the light segments indicate the
amount of water. At this stage of the operation, you can
change the amount of water by turning the Rotary Switch.
Example: this is how to prepare a strong coffee.
Place a cup under the coffee spout.
ä l Turn the Rotary Switch to the 1 coffee setting d.
l
o
o
l
One-off setting during
drink preparation
One-off setting during
drink preparation
To Next Page
Loading...
