35
5 Preparing drinks at the touch of a button
r l Turn the switch in the anticlockwise direction.
The milk foam will be prepared.
t l Turn the switch in the clockwise direction when there is
suffi cient milk foam in the cup.
As long as the light segment continues to fl ash by the
switch, you can continue preparing milk foam.
To ensure that the Easy-Auto-Cappuccino Frother works
perfectly, you should clean it daily. Further information can be
found in Chapter 8, 'Maintenance
– cleaning the Easy-Auto-
Cappuccino Frother'.
To obtain a perfect water fl ow, attach the removable hot water
nozzle.
There is a danger of scalding from hot water splashes.
Avoid direct contact with the skin.
Start by replacing the nozzle:
Carefully remove the Easy-Auto-Cappuccino Frother
from the Connector System
©
.
Take the hot water nozzle out of the Welcome Pack.
Insert this into the Connector System
©
with a light turn-
ing motion.
Place a cup under the hot water nozzle.
Precondition: your IMPRESSA is ready for use.
r l Turn the switch in the anticlockwise direction.
The light segment on the switch will light up and hot
water will fl ow into the cup.
t l Turn the switch in the clockwise direction when there is
suffi cient water in the cup.
o
l
l
l
l
l
Hot water Hot water
CAUTIONCAUTION
To Next Page
Loading...
