JVC DLA-X95R

User Name Edit
You can edit the “User 1” to “User 5” names in the Picture mode.
0
Characters that are usable include alphabets (upper or lower case), numeric characters, and symbols.
0
Enter not more than 10 characters.
.
MENU
BACK
User 1
\}{][><
)(
~
|
;:
?=/-+*&%$#"!
^.,0987654321
zyxwvytsrqpon
lkjihgfedcba
YXWVUTSRQPON
MLKJIHGFEDCB
Z
m
@
A
>>
SPACE
After entry is complete, select
“OK” and press the [OK] button
Selection Cursor
Input Cursor
Back
Select
Exit
Operate
Installation
OKAll ClearClear
User Name Edit
Clear Motion Drive
For reducing the after-image, which occurs in a fast-moving scene.
Æ “Reducing the After-image of Fast-moving Images (Clear Motion Drive (C.M.D.))” （p. 46）
Lens Aperture
For adjusting the amount of opening of the optical iris.
0
Stopping down the iris reduces the brightness, while opening it up increases the contrast.
0
Setting range: -15 (stops down) to 0 (opens up)
Lamp Power
The brightness of the lamp can be set to “Low” or “High”.
0
The factory setting varies with the “Picture Mode”.
0
Continuous use at the “High” setting may cause the lamp to darken faster.
Reset
For restoring the image quality adjustment settings to the factory default.
52
Adjust/Set