JVC DLA-X95R User Manual

RemoteCode
Forchangingtheremotecontrolcode.

Youneedtoconfiguretheremotecontrolaccordingtothesettingsofthisunit.
Ontheremotecontrolunit,pressthe[MENU]and[BACK]buttonsatthesametimeforthreesecondsorlongerto
switchthecode.

Thebacklightoftheremotecontrolblinks3times:changetheremotecontrolcodeto“A”

Thebacklightoftheremotecontrolblinks2times:changetheremotecontrolcodeto“B”
Setting Description
A Changetheremotecontrolcodefrom“B”to“A”.
B Changetheremotecontrolcodefrom“A”to“B”.
LampReset
Forresettingthelamptimeto“0”.
¨“ResettingtheLampTime”（p.67）
GlossaryofNetworkTerminology
DHCP : AbbreviationforDynamicHostConfigurationProtocol.Thisisaprotocolforthenetwork
toassignanIPaddressautomaticallytotheconnecteddevice.
IPAddress : Numericcharactersforidentifyingthedevicethatisconnectedtothenetwork.
SubnetMask : Numericcharactersthatdefinethebitcountusedforthenetworkaddressthatisa
segmentoftheIPaddress.
DefaultGateway : Serverforcommunicatingbeyondthenetworkthatisdividedbythesubnetmask.
MACAddress : AbbreviationforMediaAccessControladdress.Thisisanumberthatisuniquetoeach
networkadapter.EachofthenetworkadaptersisassignedwithauniqueMACaddress.
63
Adjust/Set

JVC DLA-X95R Specifications

General

Brand	JVC
Model	DLA-X95R
Category	Projector
Language	English