What to do if JVC Camcorder screen does not refresh or remains black?
If the screen on your JVC Camcorder doesn't refresh or remains black, check that both the camera and the access point are properly connected.
What to do if unable to transfer videos and still images to smartphone (or computer) from JVC Camcorder?
If you are unable to transfer videos and still images to your smartphone or computer from your JVC Camcorder, check the amount of remaining free space on the destination device.
Why JVC Camcorder screen does not refresh or remains black?
If the screen on your JVC Camcorder does not refresh or remains black, check that the camera and the access point are properly connected. If the camera disconnects from the access point, images cannot be detected on the terminal (smartphone or computer).
Why JVC Everio GZ-EX210 unable to transfer videos to smartphone?
If you're unable to transfer videos and still images to your smartphone or computer from your JVC Camcorder, check the amount of remaining free space on the destination medium (smartphone or computer).
Why my JVC Everio GZ-EX210 Camcorder turns off automatically?
To prevent the situation of forgetting to turn off the power, your JVC Camcorder will turn off automatically after 10 days of continuous usage.
What to do if unable to access the entered URL (cannot be found) on JVC Everio GZ-EX210 Camcorder?
If you can't access the entered URL on your JVC Camcorder, first, confirm that the camera is properly connected to a wireless LAN router. Also, verify that your computer is correctly connected to the same wireless LAN router. Finally, double-check that the URL you entered is accurate.
What to do if my JVC Everio GZ-EX210 connection gets disconnected or shows 'UNABLE TO CONNECT'?
To address connection issues with your JVC Camcorder, ensure the devices are not too far apart and that there are no obstructions. Interference from microwave ovens or other wireless devices can also cause disconnections. Try moving to a location with a stronger signal to re-establish the connection. If problems persist, restart your smartphone or computer.
How to browse internet when computer is connected to JVC Everio GZ-EX210?
If you are unable to browse the internet when your computer is connected to the JVC Camcorder, it's likely because most computers can't connect to multiple access points simultaneously. Reconnect your computer to your usual wireless LAN router for internet access. If your computer connects to the camera unintentionally, remove the camera connection. You can also stop direct monitoring on the camera.
What to do if unable to access the entered URL (password required) on JVC Everio GZ-EX210?
If you are unable to access the entered URL and it requires a password on your JVC Camcorder, enter your username and password. The username is 'everio' (fixed), and the default password is '0000', which you can change.
What to do if operations from this unit do not work when direct monitoring is in use on JVC Camcorder?
If operations from the unit do not work when direct monitoring is in use on your JVC Camcorder, tap 'CAMERA OPERATION' on the screen to enable operations from this unit. Note that when operations from this unit are enabled, operations from the smartphone or computer will not work.
Basic techniques for stable image capture and various shooting scenarios like travel and events.
Tips for capturing Christmas celebrations and wedding videos effectively.
Guidance for capturing good times during trips and amusement park visits.
Overview of Wi-Fi functions and their capabilities for smartphone or computer connection.
System requirements and essential cautions for safe and effective Wi-Fi usage.
How to check camera image via direct Wi-Fi connection with smartphone or computer.
List of included accessories and their descriptions for initial setup and operation.
Instructions for charging the battery and inserting an SD card for recording.
Explains how to operate the camera using the touch screen interface for navigation and control.
How to record videos automatically adjusting settings for shooting conditions.
How to adjust settings like brightness and shutter speed manually for desired results.
Adjusting focus and brightness via touch or face/pet tracking for clear subjects.
How to select and play recorded videos from an index screen using the camcorder.
Instructions on connecting the unit to a TV for playback via HDMI or AV cables.
How to delete unwanted files and prevent accidental deletion by protecting files.
Capturing high-resolution still images from scenes within recorded videos.
Copying recorded files to discs or playing back created discs using a DVD writer.
Copying videos/images to SD cards or computers for backup and transfer.
Configuring settings using the shortcut menu for video/still image recording.
Adjusting video and still image settings like brightness, white balance, and quality.
Configuring common settings applicable across different recording and playback modes.
Steps to take when the unit is not functioning correctly or shows errors.
Solutions for SD card issues and common playback problems.
Addressing problems with LCD monitor visibility and image quality.
Instructions for cleaning the camcorder body, lens, and LCD monitor.
Detailed technical specifications of the camera, including power, dimensions, and features.
To Next Page
General