USB Menu Operations
By connecting a USB cable between this
unit and your computer, you can perform
operations such as file backups to
computer/disc or file uploads to file-sharing
site using your computer.
Preparation:
0
Install the LoiLoFit for Everio software
onto the computer.
0
Close the LCD monitor to turn off the
camera. Disconnect the power supply.
1
Open the LCD monitor to connect
to the computer with the USB
cable.
0
Refer to the connection diagram in the
“File Backup (Windows)” section.
(p. 14)
0
Reconnect the power supply to turn on
the camera.
2
The [SELECT DEVICE] menu appears.
Tap [CONNECT TO PC] on the camera’s
touch screen.
.
0
Tap [CONNECT TO OTHER] if the camera
is connected to a device other than a
computer.
3
The [CONNECT TO PC] menu appears.
Tap an option that best suits your needs.
.
Option Usage
PLAYBACK
ON PC
0
To play back your recordings
on the computer.
0
To back up your recordings
on the computer without
using the provided software.
CREATE
DISC
0
To save your recordings on a
disc.
DIRECT
DISC
0
To save all unsaved
recordings on a disc.
UPLOAD
0
To upload videos to file-
sharing sites.
BACK UP
0
To back up recordings on
the computer.
For detailed operations on the above options,
refer to the other sections in this guide or the
“Detailed User Guide”.
13
To Next Page
Loading...
Need help?
General