To Next PageTo Next PageHow to fix noise interfering with JVC GY-HD200U Camcorder playback video?
If you notice noise interfering with the playback video on your JVC Camcorder, the video head may be clogged with dirt. Clean the head with the special head cleaning tape.
General| Sensor Type | 3CCD |
|---|---|
| Sensor Size | 1/3 inch |
| Sensor Resolution | 1280 x 720 |
| Recording Media | MiniDV tape |
| HD Format | 720p |
| Filter Diameter | 72 mm |
| Viewfinder | Color LCD |
| LCD Screen | 3.5 inch |
| Microphone Input | Yes |
| Headphone Jack | Yes |
| HDMI Output | No |
| Component Output | Yes |
| Composite Output | Yes |
| USB | No |
| Battery Type | Lithium-ion |
| Camera Type | Shoulder-Mount |
| Recording Format | HDV |
| Frame Rates | 24p, 30p, 60i |
| Lens | Interchangeable |
| Maximum Aperture | f/1.6 |
| Audio Recording | 16-bit PCM |
| Audio Input | XLR |
| ND Filter | Built-in |
| FireWire | Yes |
| Weight | 2.5 kg |
Highlights recording formats, 24p mode, camera section design, and shooting functions.
Essential guidelines for safe and optimal device operation, including environmental limits.
How to operate the device using AC power and manage battery charging and usage.
Step-by-step guide for turning the camera power on and off, including mode switching.
Instructions for inserting and removing videocassettes, including important precautions.
Procedures for presetting time codes, user bits, and synchronizing via IEEE1394.
How to adjust LCD monitor direction, angle, brightness, and viewfinder settings.
Step-by-step guide for adjusting back focus using a Siemens star chart for optimal focus.
How to set the video format, frame rate, and reboot the system.
Methods for performing manual and full auto white balance and white shading adjustments.
Selecting audio inputs, adjusting levels, and monitoring audio during recording.
Step-by-step guide to start recording, including tally lamps and quick start mode.
Managing record-standby mode, tape protection, and checking recorded content.
Configuration and execution of the HEADER REC function for pre-roll recording.
Steps to load tape, enter VTR mode, start playback, and use fast forward/rewind.
How to select audio channels and output modes for monitoring during playback.
Connecting and dubbing digital signals using IEEE1394 for high-quality audio/video transfer.
Recording camera image/sound for backup on an IEEE1394-equipped component.
Connecting and operating the remote control unit for accessing camera functions.
Configure video format, frame rate, and 1080i camera settings.
Provides solutions for common problems like power issues, recording failure, and display problems.
