JVC GY-HD201E - Page 25

21
 When Recording HDV or DV Images from the IEEE1394 Terminal (Only with the GY-HD200U and GY-HD201E)
MEMO
Synchronize the setting for FRAME RATE on the VIDEO FORMAT menu screen with the frame rate of the IEEE1394 input signal.
 When playing back 1080i 60/50 HDV images recorded on the DR-HD100 (Only with the GY-HD200U and GY-HD201E)
MEMO
• When [HDV PB OUTPUT] menu is set to 720P, setting [1080I CAMERA] menu to ON will set the [HDV PB OUTPUT] menu to
[NATIVE].
• When [1080I CAMERA] menu is set to ON and [HDV PB OUTPUT] menu is set to [1080I], [NATIVE], Composite Out will
delay 1 frame as compared to Component Out.
Recording
(IEEE1394 In)
Rec on Tape
Component Out
Composite Out
[HDV PB OUTPUT] menu item
NATIVE 720P 1080I NTSC PAL
HDV
720/60p qqq1080/60i 480/60i N/A 480/60i
720/30p q 720/60p q 1080/60i 480/60i N/A 480/60i
720/50p qqq1080/50i N/A 576/50i 576/50i
720/25p q 720/50p q 1080/50i N/A 576/50i 576/50i
720/24p q 720/60p q 1080/60i 480/60i N/A 480/60i
480/60p N/A N/A N/A N/A N/A N/A N/A
576/50p N/A N/A N/A N/A N/A N/A N/A
DV
U model
480/60i qq q
480/60i(24p) qq q
E model
576/50i qq q
576/50i(25p) qq q
HD
[1080I CAMERA]
menu item
Rec on Tape
Component Out
Composite Out
[HDV PB OUTPUT] menu item
NATIVE 720P 1080I NTSC PAL
ON
1080/60i N/A 1080/60i N/A 1080/60i 480/60i N/A 480/60i
1080/50i N/A 1080/50i N/A 1080/50i N/A 576/50i 576/50i
e_hd200.book Page 21 Friday, February 1, 2008 4:04 PM