JVC GY-HM150U User Manual

69
* Default values are indicated in bold characters.
TC/UB Menu
Item Setting Values Function
TC Generator
Free Run
Rec Run
Regen
For setting the operation of the time code.
Free Run : The time code operates in the run mode at all times regardless of the recording
status. It continues to run even when the power of the camera recorder is turned
off.
Rec Run : The time code operates in the run mode during recording. It continues to run in the
order of the recorded clips as long as the SDHC/SDXC card is not replaced. If the
SDHC/SDXC card is removed and recording is made on another card, time code
will be recorded on the new card from where it was left off in the previous card.
Regen : The time code operates in the run mode during recording. When the SDHC/SDXC
card is replaced, the last time code recorded on the card is read and recorded on a
new card so that the time code continues in running order. (A Page 39)
TC Preset
^ For setting the time code (hour, minute, second, frame).
Display : Drop setting 02:02:25.20
: Non Drop setting 02:02:25:20
Memo :
● When [TC Generator] is set to ARegenB, this item appears as A<Regen>B and cannot be
selected.
UB Preset
^ For setting the user’s bit. (Digit by digit)
Display : AB CD EF 01
Memo :
● When [TC Generator] is set to ARegenB, this item appears as A<Regen>B and cannot be
selected.
Drop Frame
Non Drop
Drop
For setting the framing mode of the time code generator.
Non Drop : Internal time code generator works in the non-drop-frame mode. Use this setting
when placing emphasis on the number of frames.
Drop : Internal time code generator works in the drop-frame mode. Use this setting when
placing emphasis on the recording time.
Memo :
● This item can be set only when the frame rate of [Frame & Bit Rate] in the [Record
Set]B[Record Format] menu is set to A60pB, A30pB, or A60iB. When the frame rate is A24pB,
ANon DropB becomes fixed and cannot be selected. When the frame rate is A50pB, A25pB, or
A50iB, this item appears as A---B and cannot be selected. (A Page 63)
GY-HM150U.book Page 69 Monday, September 5, 2011 1:48 AM

JVC GY-HM150U Specifications

General

Sensor type	CCD
Number of CCDs	3
Total megapixels	- MP
Optical sensor size	1/4 \
Digital zoom	- x
Optical zoom	10 x
Image stabilizer	Yes
Focal length range	3.7 - 37 mm
Interchangeable lens	-
Image stabilizer type	Optical Image Stabilization (OIS)
Maximum aperture number	2.8
Minimum aperture number	1.8
Maximum focal length (35mm film equiv)	390 mm
Minimum focal length (35mm film equiv)	39 mm
Memory slots	2
Camcorder media type	Memory card
Disc types supported	No
Compatible memory cards	SDHC, SDXC
Internal storage capacity	- GB
Camera shutter speed	0.0001 - 0.27 s
Display diagonal	2.7 \
Display aspect ratio	16:9
Display resolution (numeric)	230000 pixels
Viewfinder type	Electronic
Viewfinder resolution	260000 pixels
Viewfinder screen size	0.24 \
Camcorder type	Handheld camcorder
Product color	Black
Video resolutions	720 x 480, 1280 x 720, 1440 x 1080, 1920 x 1080 pixels
Supported video modes	1080i, 480i, 480p, 720p
Video formats supported	AVI, MOV, MP4, MPEG2
Maximum video resolution	1920 x 1080 pixels
Analog signal format system	NTSC, PAL
Bitrate at maximum video resolution	35 Mbit/s
Audio formats supported	LPCM
Headphone connectivity	3.5 mm
USB 2.0 ports quantity	0
Component video (YPbPr/YCbCr) out	1
Battery voltage	7.2 V
Charging source	AC
Battery capacity	- mAh
Battery life (max)	- h
Storage temperature (T-T)	-20 - 50 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	30 - 80 %
Cables included	AV, Component
Power consumption	7.8 W

Weight and Dimensions

Depth	366 mm
Width	138 mm
Height	179 mm
Weight	1400 g