JVC GY-HM150U - Page 88

84
Status Screen
STATUS 3 Screen
This screen displays a list of the functions assigned to the switches.
STATUS 4 Screen
This screen displays the event. It is also used to display warnings only.
Status Screen in Camera
Mode (continued)
A
B
D
C
* 0 : Same as STATUS 0 Screen (A Page 80)
* 1 : Same as STATUS 1 Screen (A Page 82)
* 2 : Same as STATUS 2 Screen (A Page 83)
*0 *1 *2
* 1 : (Appears only during warnings)
Item Description
A [FAW] Function
Assignment
Displays the position of the [WHT.BAL] selection switch that is assigned with the FAW function.
(NONE, A, B, PRESET)
B [GAIN] Switch Settings
Displays the setting values for each of the positions ([L]/[M]/[H]) on the [GAIN] switch.
(0dB, 3dB, 6dB, 9dB, 12dB, 15dB, 18dB, AGC)
C [Zoom Speed] Switch
Settings
Displays the speed of zoom operation set with the set lever (on the LCD monitor) and remote control.
(-2, -1, Normal, 1)
D User Button Function
Settings
Displays the setting status of the [USER1], [USER2], [LOLUX/3], [C.REVIEW/4], [ZEBRA/5], and [REC/6]
buttons. (A Page 66)
(NONE, REC*, LOAD FILE, OK MARK, CLIP CUTTER TRIG, BACKUP TRIG, AE AREA, CLIP REVIEW,
REC STOP, ZEBRA, LOLUX, TELE MACRO, TC/UB, BARS, FOCUS ASSIST)
* ARECB can only be assigned to [REC/6]
* 0 : Same as STATUS 0 Screen (A Page 80)
* 1 : Same as STATUS 1 Screen (A Page 82)
* 0 * 1 (Appears only during warnings)
*0
GY-HM150U.book Page 84 Monday, September 5, 2011 1:48 AM