To Next PageTo Next PageWhy does my JVC GY-HM150U Camcorder power not turn on?
If your JVC Camcorder isn't powering on, several factors could be at play. First, ensure the AC adapter is correctly connected. Second, confirm that the battery has sufficient charge. Finally, if you've just turned the camcorder off, wait at least 5 seconds before attempting to power it on again.
How to display CPU and Program version on JVC Camcorder?
To display the CPU and Program version on your JVC Camcorder, turn the power ON. While holding down the [OIS] button, perform the following operations: hold down the [USER1] and [USER2] buttons, then press the [MENU] button for less than 1 second. Press the [MENU] button again.
Why do images look unnatural on the TV monitor screen (long and thin, etc.) when using my JVC GY-HM150U Camcorder?
If images look unnatural on the TV monitor screen (long and thin, etc.), adjust [Video Output] in the [A/V Out] menu to match your TV monitor.
Why is there no display on the TV monitor from my JVC GY-HM150U Camcorder?
If there is no display on the TV monitor when connected to your JVC Camcorder, set [Display On TV] in the [A/V Out] menu to AOnB.
Why is the screen display uneven on my JVC GY-HM150U?
If the screen display is uneven on your JVC Camcorder, and if the screen or surrounding parts have been pressed, remove your hands and leave the camera for a short while.
Why does the screen of my JVC GY-HM150U appear dark or whitish?
If the screen of your JVC Camcorder appears dark or whitish, try adjusting the angle and brightness of the screen. Also, note that when used in cold places, the screen may appear darker. If the issue persists, the screen may be reaching the end of its service life. Consult your nearest JVC dealer.
Why does the color of the subject look unnatural (reddish, bluish, etc.) on my JVC GY-HM150U?
If the color of your subject looks unnatural (reddish, bluish, etc.) when using your JVC Camcorder, especially under specific lighting conditions or with numerous light sources, switch to manual shooting mode and perform auto white balance adjustment. Alternatively, adjust the red or blue using white paint adjustment.
What to do if the subject is too dark on my JVC Camcorder?
If your subject appears too dark when using your JVC Camcorder, try the following: Use the Lolux mode. Set exposure to the [+] side. Switch to manual shooting mode and increase sensitivity using the [GAIN] switch. Set the [GAIN] switch to AAGCB. Open up the aperture.
How to fix dark or blurred images on JVC GY-HM150U Camcorder LCD monitor and viewfinder screens?
If the images on your JVC Camcorder's LCD monitor and viewfinder screens appear dark or blurred, try these adjustments: Readjust the brightness of the LCD monitor screen and viewfinder. Check if [ND FILTER] is set to AONB. Ensure the iris isn't closed. Verify that the shutter speed setting isn't too high.
What to do if the camera image is not output on the LCD monitor and viewfinder screens of my JVC GY-HM150U Camcorder?
If the camera image is not appearing on the LCD monitor and viewfinder screens, first ensure that the camcorder is set to Camera mode by checking if the [CAM] indicating lamp is red. If not, switch to Camera mode using the [CAM/MEDIA] selection switch. Also, if you're using the viewfinder with [VF Slide SW] set to AEnableB in the [LCD/VF] menu, make sure the viewfinder is pulled out. Finally, if any cables are connected to the [HDMI], [COMPONENT OUT] or [A/V OUT] terminal, disconnect them, as video images will not appear on the viewfinder when these are connected.
General| Sensor type | CCD |
|---|---|
| Number of CCDs | 3 |
| Total megapixels | - MP |
| Optical sensor size | 1/4 \ |
| Digital zoom | - x |
| Optical zoom | 10 x |
| Image stabilizer | Yes |
| Focal length range | 3.7 - 37 mm |
| Interchangeable lens | - |
| Image stabilizer type | Optical Image Stabilization (OIS) |
| Maximum aperture number | 2.8 |
| Minimum aperture number | 1.8 |
| Maximum focal length (35mm film equiv) | 390 mm |
| Minimum focal length (35mm film equiv) | 39 mm |
| Memory slots | 2 |
| Camcorder media type | Memory card |
| Disc types supported | No |
| Compatible memory cards | SDHC, SDXC |
| Internal storage capacity | - GB |
| Camera shutter speed | 0.0001 - 0.27 s |
| Display diagonal | 2.7 \ |
| Display aspect ratio | 16:9 |
| Display resolution (numeric) | 230000 pixels |
| Viewfinder type | Electronic |
| Viewfinder resolution | 260000 pixels |
| Viewfinder screen size | 0.24 \ |
| Camcorder type | Handheld camcorder |
| Product color | Black |
| Video resolutions | 720 x 480, 1280 x 720, 1440 x 1080, 1920 x 1080 pixels |
| Supported video modes | 1080i, 480i, 480p, 720p |
| Video formats supported | AVI, MOV, MP4, MPEG2 |
| Maximum video resolution | 1920 x 1080 pixels |
| Analog signal format system | NTSC, PAL |
| Bitrate at maximum video resolution | 35 Mbit/s |
| Audio formats supported | LPCM |
| Headphone connectivity | 3.5 mm |
| USB 2.0 ports quantity | 0 |
| Component video (YPbPr/YCbCr) out | 1 |
| Battery voltage | 7.2 V |
| Charging source | AC |
| Battery capacity | - mAh |
| Battery life (max) | - h |
| Storage temperature (T-T) | -20 - 50 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 30 - 80 % |
| Cables included | AV, Component |
| Power consumption | 7.8 W |
Weight and Dimensions| Depth | 366 mm |
|---|---|
| Width | 138 mm |
| Height | 179 mm |
| Weight | 1400 g |
