JVC GY-HM250E - Formatting (Initializing) SD Cards

Switching the SD cards
When both card slots are inserted with SD cards,
you can use the [SLOT SEL
] button to switch the
card to use.
When the memory on an SD card is full during
recording, data recording automatically switches to
the other card.
.
Memo :
0
The [SLOT SEL] button is disabled during
recording or playback. Cards will not be
switched even if you press the button.
Formatting (Initializing) SD Cards
When the following cards are inserted, [!FORMAT]
appears at the remaining media display area.
Format the card using the camera recorder menu.
0
Unformatted SD cards
0
SD cards formatted under different
specifications
* For details of the menu operation, refer to
“
[Basic Operations in Menu Screen]
(A P 97
)”.
Caution :
0
Be sure to format the SD card on this camera
recorder. SD cards
formatted on a PC and other
peripheral equipment cannot be used on this
camera recorder.
0
[!RESTORE] appears at the remaining media
display area when an SD card that requires
restoring is inserted.
1
Select [System] B [Media] B [Format
Media]
.
(A
P121 [ Format Media ] )
2
Select the slot of the SD card to be
formatted and press the Set button (R).
.
2
Set
Format Media
Format Slot A
Format Slot B
3
The status of the selected SD card appears.
4
Select [Format] and press the Set button
(R).
.
4
Set
Cancel
Format
Format Media
5
Formatting starts.
.
Formatting...
SD Card
45
Preparations