Selecting Video/Still Image Recording Mode
There are two recording modes, namely Video recording and Still Image
recording.
o
Selecting Video Recording Mode
This unit
enters into the video recording mode when the power is turned on.
If the unit is in the still image recording mode, press the “MODE” button to
switch to video recording mode.
1
Press the “MODE” button to display the icon (A) of video recording
mode on the screen
.
0
You can start video recording.
“Taking Videos in Auto Mode” (A p. 20)
o
Selecting Still Image Recording Mode
1
Press the “MODE” button to display the icon (B) of still image recording
mode on the screen
.
0
You can start still image recording.
“Taking Still Images in Auto Mode” (A p. 24)
Memo :
You can also select the video/still image recording mode on the touch
screen.
Tap A (video)
or B (still image) to display the selection screen. Tap the icon
of the desired mode.
The “MODE” button cannot be used to switch between the 60i mode
(interlace) and 60p mode (progressive).
Recording
19
To Next Page
Loading...
Need help?
General
