Capturing Smiles Automatically (SMILE SHOT)
“SMILE SHOT” automatically captures a still image upon detection of a
smile.
This function is available for both videos and still images.
Set “TOUCH PRIORITY AE/AF” to “FACE TRACKING” before selecting
“SMILE SHOT”.
“Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)” (A p. 34)
1
Tap “MENU”.
.
0
The top menu appears.
2
Tap “RECORD SETTING”. (Go to step 4.)
Alternatively, tap “SMILE SHOT” in the shortcut menu. (Go to step 5.)
.
3
Tap “SMILE SHOT”.
.
0
Tap 0 or 1 to move to the previous/next menu.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
4
Tap “ON”.
.
0
Tap L to exit the menu as the previous screen appears.
5
Point the camera toward the human subject.
0
A still image is automatically captured when smiles are detected.
.
0
PHOTO lights up when a still image is being captured.
0
You can display the smile level (%) together with the frame by setting
“SMILE%” in the menu to “ON” before recording.
“Setting SMILE%” (A p. 36)
Memo :
0
The camera is able to detect up to 16 faces. Smile levels will be displayed
for up to 3 of the largest faces displayed on the screen.
0
This function may not work properly depending on the shooting conditions
(distance, angle, brightness, etc.) and the subject (direction of face, smile
level, etc.). It is also difficult to detect a smile in backlight.
0
After a smile is detected and captured, it takes time before the next
recording may be performed.
0
“SMILE SHOT” does not work in the following cases:
- when menu is being displayed
- when remaining recording time or battery power is being displayed
- when any functions in “SPECIAL RECORDING” is set
Caution :
0
If “TOUCH PRIORITY AE/AF” is not set to “FACE TRACKING”, “SMILE
SHOT” will not work.
0
If appropriate results cannot be obtained, record with “SMILE SHOT” set
to “OFF”.
0
When “VIDEO QUALITY” is set to “SSW” or “SEW”, smile shot does not
function.
Recording
35
To Next Page
Loading...
