4
Tap “SELF-TIMER”.
.
0
Tap 0 or 1 to move to the previous/next menu.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
5
Tap “2SEC” or “10SEC”.
.
DETECTION
FACE
2SEC
10SECOFF
SELF-TIMER
6
Set the focus on the subject.
.
0
When focused, the focus icon lights up in green.
7
Take a still image.
.
0
A timer appears and countdown to shooting starts.
0
To stop the self-timer, press the SNAPSHOT button again.
Using the Face Detection Self-timer
Pressing the SNAPSHOT button starts face detection, and shooting is
performed three seconds after another person enters the frame.
This function is useful when you want to include the photographer in the
group photo.
1
Check that the unit is in the still image mode.
.
0
Check if still image mode B is activated.
0
If video mode (
A) is activated, switch to still image mode (B).
“Selecting Video/Still Image Recording Mode” (A p. 19)
2
Tap “MENU”.
.
0
The top menu appears.
3
Tap “RECORD SETTING”.
.
4
Tap “SELF-TIMER”.
.
0
Tap 0 or 1 to move to the previous/next menu.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
5
Tap “FACE DETECTION”.
.
DETECTION
FACE
2SEC
10SECOFF
SELF-TIMER
Recording
42
To Next Page
Loading...
