JVC GZ-HD3U - Accessory Setup and Preparation; Shoulder Strap and Remote Control Setup; Audio Cable Core Filter Attachment

Position the buckle near the
eyelet and reattach the pad.
--
Buckle
Thread the strap through the
buckle, adjust its length, and
use the strap guide to fix it
in place.
Strap Guide
Attaching the Shoulder Strap
Peel off the pad and thread
the end of the strap through
the eyelet.
Eyelet
Preparing the Remote Control
A battery is included inside the remote control at the time of purchase.
Remove the insulation sheet before use.
Lithium Battery
(CR2025)
Lock Tab
Effective distance:
Max. 5 m (16 ft)
Remote Sensor --+ <
ImmI
The transmitted beam may not be effective
or may cause incorrect operation when the
remote sensor is directly exposed to sunlight
or powerful lighting.
IBeam Effective Area I ITo Reinsert the Battery
Pull out the battery holder by pressing the
lock tab.
Attaching the Core Filter to the Audio Cable
11
3 cm (1-3/16")
Attach the core filter to the audio cable which is used to connect an optional external microphone
to the camera. The core filter reduces interference. Connect the end of the cable with the core
filter to the camera.
Release the stopper.