The
~
indicator becomes green when
the captured image
is
focused.
Press
the
PLAY/REC
button
to
select
recording
mode.
ISELECT I
PLAY/REC
The switch returns
to
the original
position when it
is
released.
The
0 lamp
on
the camera lights
up.
Still
Image
Recording
Preparation: Set the power/mode switch to ON.
Slide
the
power/mode
switch
to
MODE
to
select
Q
(still
image)
mode.
•
To
change
the
picture
quality
Change the settings
in
[QUALITY].
(u
pg.
68)
• To record
still
images
continuously
Set [CONTINUOUS SHOOTING] to
[ON].
(u
pg.
68)
•
To
change
the
image size
Change the settings
in
[IMAGE SIZE].
(u
pg.
68)
•
Press
the
SNAPSHOT
button
to
V
start
recording.
, - -----
--,
I ,
I ,
r )
IEDD
• If the camera
is
not operated for 5 minutes while the power
is
on, it turns itself off automatically
to
conserve power.
To
turn the camera
on
again when using the battery pack, set the power/
mode switch to OFF, then to
ON.
When using the
AC
adapter, perform any operation such
as
zooming.
• The sides of still images recorded
in
16:9 size may be cut off when printed. Check whether
16:9 size prints can
be
printed at your local print store.
21
To Next Page
Loading...
