Creating Discs/Editing Files
Preparation:
elnstall the software from the included CO-
RaM.
(a
pg. 53)
e Connect the camera to the
PC
with the USB
cable.
(a
pg. 55)
1 Set
the
camera's power/mode
switch
to
ON.
2 On
the
camera, move
the
set
lever
to
A / v
to
select [PLAYBACK
ON
PC],
then
press
down.
A dialog box is displayed on the PC
screen. However, you do not need to
use the dialog box. PowerCinema starts
automatically.
3
Click
[Copy/Edit].
4
Click
the media
that
contains
desired
files.
5
Click
the
check
box
of
the desired
file.
The"
mark appears
in
the check box.
To
select other files, repeat this step.
Continued
on
next page
59
To Next Page
Loading...
