Manual
Focus
After
performing
"To
Change
to
Manual
Recording
Mode"
(u
pg.
24)
ImD
If
you
use focus assist
in
dark places, the
rough area of the image appears
in
color, and
the outline color becomes difficult to see.
Nightalive enables recording with more
sensitivity
in
dim locations,
by
adjusting the
shutter speed automatically.
After
performing "To Change
to
Manual
Recording
Mode"
(u
pg. 24)
,
Nightalive
2
Adjust
the
focus.
1
Focus
Assist
• To cancel
the
manual
focus
setting
Move the set lever to v (FOCUS) so that
the
~/~
indicator disappears.
The image becomes black and white. The
outline of focused object
is
displayed
in
blue. Use this for adjusting the focus more
precisely.
Backlight compensation brightens the subject
by
increasing the exposure.
After
performing "To Change
to
Manual
Recording
Mode"
(u
pg. 24)
Backlight
Compensation
I
•
To
cancel Nightalive
Move the set lever to
<(NIGHT)
so
that the
mA
indicator disappears.
ImD
It
is
recommended
to
use the tripod
(u
pg.
18)
because the shutter speed becomes slow.
1
2
Adjust
the
focus,
then
press
down
the
set
lever
to
fix
the
focus.
• To cancel
the
focus
assist
mode
Press the FOCUS ASSIST button again.
• To change
the
outline
color
Change the settings
in
[FOCUS ASSIST].
(u
pg. 69)
•
To
cancel
backlight
compensation
Move the set lever to
A.
(
~
) twice so that
the
~
indicator disappears.
25
To Next Page
Loading...
