•
For
safety, DO NOT
...
open the camera's chassis.
...
disassemble or modify the unit.
...
allow inflammables, water or metallic objects
to enter the unit.
...
remove the battery pack or disconnect the
power supply while the power
is
on.
81
Cautions
AC
Adapter
When
using
the
AC
adapter
in
areas
other
than
the
USA
The provided AC adapter features automatic
voltage selection in the AC range from 110 V to
240V.
USING HOUSEHOLD AC PLUG ADAPTER
In
case of connecting the unit's power cord to
an AC wall outlet other than American National
Standard C73 series type use an AC plug
adapter, called a "Siemens Plug", as shown.
For this AC plug adapter, consult your nearest
JVC dealer.
Plug
Adapter
~
....
~c]:
Battery
Packs
The supplied battery
Terminals
pack is a lithium-ion
battery. Before using
the supplied battery
pack or an optional
battery pack, be sure
to read the following
cautions:
• To
avoid
hazards
...
do
not
burn.
...
do
not
short-circuit the terminals. Keep it away
from metallic objects when not
in
use. When
transporting, make sure the provided battery
cap
is
attached to the battery. If the battery
cap
is
misplaced, carry the battery
in
a plastic
bag.
...
do
not
modify
or
disassemble.
...
do
not
expose the battery to temperatures
exceeding 60°C (140°F), as this may cause
the battery to overheat, explode or catch fire.
... use only specified chargers.
• To
prevent
damage
and
prolong
service
life
... do not subject to unnecessary shock.
... charge within the temperature range of 10°C
to 35°C (50°F to 95°F). This
is
a chemical
reaction type battery - cooler temperatures
impede chemical reaction, while warmer
temperatures can prevent complete charging.
... store in a cool, dry place. Extended exposure
to high temperatures will increase natural
discharge and shorten service life.
... fully charge and then fully discharge the
battery every 6 months when storing the
battery pack over a long period of time.
... remove from charger or powered unit when
not
in
use, as some machines use current
even when switched off.
Recording
Medium
•
Be
sure
to
follow
the
guidelines
below
to
prevent
corruption
or
damage
to
your
recorded
data.
•
Do
not
bend
or
drop the recording medium, or
subject
it
to
strong pressure, jolts
or
vibrations.
•
Do
not splash
the
recording medium with
water.
•
Do
not
use,
replace, or store
the
recording
medium
in
locations that
are
exposed
to
strong
static electricity or electrical
noise.
•
Do
not
turn off the camera power or
remove
the battery or
AC
adapter during shooting,
playback, or
when
otherwise accessing the
recording medium.
•
Do
not bring
the
recording medium near objects
that
have
a strong magnetic field or that emit
strong electromagnetic
waves.
•
Do
not store
the
recording medium
in
locations
with
high
temperature or
high
humidity.
•
Do
not touch the
metal
parts.
• When formatting or erasing data using the
camera, only the file administration information
is changed. The data
is
not completely erased
from the hard disk. If you want to completely
erase all of the data, we recommend either
using commercially available software that
is
specially designed for that purpose,
or
by physically destroying the camera with a
hammer etc.
Hard
disk
• Do not use the unit where it is subject to
vibrations
or
loud sounds.
• If you move the unit suddenly, the drop
detection function may operate and the power
may be turned off.
(u
pg.
69)
LCD
Monitor
• To
prevent
damage
to
the
LCD
monitor,
DO
NOT
...
push
it
strongly or apply any shocks.
...
place the camera with LCD monitor on the
bottom.
• To
prolong
service
life
...
avoid rubbing it with coarse cloth.
Main
Unit
To Next Page
Loading...
