JVC GZ-HD3U - File Management: Deleting and Protecting Files; File Deletion and Protection Overview; Deleting;Protecting Current File

Managing Files
FUNCTION
After performing steps 1-2
Deleting/Protecting the Currently
Displayed File
3 Select [CURRENT].
Select
~
Set
2 Select [DELETE] or [PROTECT].
Select
~
Set
1
Preparation:
• Slide the power/mode switch to MODE to
select" or Q mode.
• Press the PLAV/REC button to select
playback mode.
The
following illustrations of display
screens are examples of when performing
[DELETE].
SNAP
SHOT
PLAV/REC
Button
Set Lever
DIRECT AUTOIINFO
FUNCTION BACKUPI
EVENT Power/Mode
Switch
&mmI
Do not remove the recording medium or
perform any other operation (such as turning
off the power) while accessing files. Also,
be sure to use the provided
AC adapter, as
the data on the recording medium may be
corrupted if the battery becomes exhausted
during operation.
If the data on the recording
medium becomes corrupted, format the
recording medium to use the medium again.
(u pg. 71)
Deleting/Protecting Files
• Protected files cannot be deleted. To delete
them, release the protection first.
• Once files are deleted, they cannot be
restored. Check files before deleting.
• For an
SO card, you can use the write/erase
protection tab to set protection.
To protect
all the files, slide the tab to the "LOCK"
position.
You can select the previous or next file by
moving the set lever to < /).
4 Select [EXECUTE].
Select
~
Set
Write/erase protection tab
• To
exit the screen
Press the FUNCTION button.
37