JVC GZ-HD3U - Moving and Copying Still Image Files; Still Image File Transfer Options; Selecting Files and Transfer Direction

Set
File transfer starts. When [COPYING/
MOVING COMPLETED] appears, press
down the set lever.
• [FILE]:
Select this to transfer the selected files.
1) Move the set lever to A / v / </>
to select the desired file, then press
down.
•
The" mark appears on the file. To
select other files, repeat this step.
2) Press FUNCTION.
• [ALL]:
Select this to transfer all files in the
recording medium.
6 Select [EXECUTE].
Select
~
4
S Set the file unit ([ALL] or [FILE]) to
copy/move.
2 Select [COpy] or [MOVE].
• [COPY]:
Files are copied to the destination
medium while leaving original files
in the
source medium.
• [MOVE]:
Files are moved to the destination
medium while deleting original files
(except read-only files) in the source
medium.
Select
Ci~~
~~
Set
Copying/Moving Still Image Files
1
You can copy or move still image files
between the HOD and
SO card.
Preparation:
• Slide the power/mode switch to MODE to
select
Q mode.
• Press the PLAY/REC button to select
playback mode.
• Make sure that
SO card is inserted in the
SO slot.
• Make sure that enough free space is left in
the copy/move destination medium.
3 Set the direction of copy/move.
(HOD - SO or SO - HOD)
• To exit the screen
Press the MENU button, then move the set
lever to
A / v to select [EXECUTE] and
press down.
• To stop the file transfer
1) Press down the set lever.
2) Select [EXECUTE] and press down the
set lever.
51