JVC GZ-HD3U - DPOF Print Settings Management; Setting Individual File Print Numbers; Setting All Files for Printing

Managing Files (Continued)
5 Select the number of prints (max. 15
prints).
Select
~
Set
To set print information for other images,
repeat steps 4 and 5.
(You can set up to
999 files.) .
After performing steps 1-2
Setting All Files Together (One Print for
Each)
Set
4 Select [EXECUTE].
Select
3 Select [ALL 1].
Select
~
FUNCTION
#)
'18"""
•......•• •·· •••. -.,.ii
-ttt.-
6
• To exit the screen
Press the FUNCTION button.
• To cancel the selection
Set the number of prints to "00" in step 5.
• To confirm DPOF settings
In step 3, move the set lever to A / v to
select [CHECK SETTINGS], then press down.
• If necessary, change the number of prints
for the desired file by following steps 4
and
5.
• To reset DPOF settings
1) In step 3, move the set lever to A / v to
select [RESET], then press down.
2) Move the set lever to A / v to select
[EXECUTE], then press down.
Set
• To exit the screen
Press the FUNCTION button.
• To cancel the selection
Set the number of prints to "00" in step 5.
• To confirm DPOF settings
In step 3, move the set lever to A / v to
select [CHECK SETTINGS], then press down.
• If necessary, change the number of prints
for the desired file by following steps 4
and 5.
• To reset DPOF settings
1) In step 3, move the set lever to A / v to
select [RESET], then press down.
2) Move the set lever to A / v to select
[EXECUTE], then press down.
42