• Select the recording medium properly.
•
To
watch images on a
TV,
set the TV's input mode
or
channel that is appropriate for video playback.
• Do not select the sepia (SEPIA)
or
monotone
(MONOTONE) mode before setting white balance.
• The driving sound (hum) of the hard disk may have been
recorded if the camera was moved suddenly during
recording. Do not move or shake the camera suddenly
during recording.
• The temperature of the camera is increasing. If the
camera continues to heat up, playback may be stopped
to protect the recording medium. In this case, turn off the
power, and then wait until the camera cools down.
• Change the settings in [VIDEO/S OUTPUT] so that it
matches the screen size of the connected
TV.
• Set [HDMI OUTPUT] to [AUTO].
• Some functions cannot be used when playing back a
disc that was created with a DVD burner. (E.g.: Slow-
motion playback, frame-by-frame playback, playback
effects etc.)
33
70
70
75
To Next Page
Loading...
