For customers using DVD Burner
(sold separately)
Sack-Up Hi-Definition Images
(Easy
and
correct way
of
copying to a
DVDJ
1.
Get
ready
a
recommended
disc
3.
Copy
all
images
to
the
DVD
..-
• There are other ways of copying which includes copying only the desired files.
For details, refer to the instruction manual of the camera (GZ-HD3).
Copying completed!
tCJ
fltlAlIZE
I
~~
~~SElECT
BAU
JP
>'~PcAYBACK
VIDEO
~'SElECT
i-SET
....-
"Copy
in
progress" screen
(Camera's LCD screen display)
@Confirm
(press
down)
@Confirm
(press
down)
@:leo",""
(press
down)
IMPORTANT
•
Playback
is
not
possible if
the
disc
is
not
finalized.
• Wait for the "copy
in
progress" screen on the
right and the "hourglass" mark to disappear,
then turn off the power and disconnect the USB
cable.
@Confirm
(press
down)
• Select "ALL"
CD
Select
(move
up
and
down)
• Confirm that the display
on
the right
appears
on
the LCD screen of the
camera (GZ-HD3)
eSelect "NORMAL BACK-UP"
CD
Select
(move
up
and
down)
oSelect "EXECUTE AND FINALIZE"
CD
Select
(move
up
and
down)
f)
Exit
Perform operations on the camera.
Recommended
discs
DVD-R DL
I
DVD-R
DVD-RW
(single-sided double layer)
Brand JVC
JVC
JVC
TDK
Verbatim
Verbatim
SONY
Next, operate the camera (GZ-HD3). Proceed to step 3 . .jIt
o Connect the USB cable provided with DVD Burner (CU-VD40/CU-VD20)
e Turn
on
the DVD Burner
After turning on the power, wait for approximately 20 seconds before proceeding to
step
•.
The burner may not function properly within this 20 seconds.
e Turn on the camera (GZ-HD3)
o Insert a new recommended disc into the DVD Burner
Please use the recommended discs stated below.
Using discs other than those recommended may cause problem when copying to the DVD
and when playing back the DVD.
2.
Set
up
each
device
before
copying
..
• Only DVD-R and DVD-RW discs can
be
used.
• Recording and playback may not function properly if the recording side
is
scratched or dirty.
To Next Page
Loading...
