JVC KD-HDR20 - Bluetooth Audio Player Control; Audio Playback Operations

Pause/start playback*
Reverse skip/forward skip
....
t5
t
:.
... -
v A
...
~........ Enter the Bluetooth menu (see
~ page 22)
SRC .. Select "BY AUDIO."
If playback does not start, operate
the Bluetooth audio player to start
playback.
* Operation may be different according to the connected
Bluetooth audio player.
Using the Bluetooth audio
player _
[Turn]
....
[I] Repeat steps [1] and W until you finish
entering the phone number.
~h' ~(
W Move to the next (or previous) number
position.
Direct dialing:
[I] Select "NUMBER."
Voice dialing:
[I] Select "VOICE."
:11" ~. -
., ~
"SAY NAME" appears on the display.
• Refer also to page 13 for connecting/disconnecting/
deleting a registered device.
• When the sound is stopped or interrupted while
using a Bluetooth device, turn off, then turn on the
unit.
- If the sound is not yet restored, connect the device
again (see page 13).
[1] Speak the name you wantto call.
• If your cellular phone does not support the
voice recognition system, "ERROR" appears
on the display.
• Using "VOICE" may be difficult in a noisy
environment or at an emergency.
Bluetooth Information:
If you wish to receive more information about
Bluetooth, visit the following JVC web site:
<http://www.jVc.co.jp/english/car/> (English
website only)
EXTERNAL DEVICES 15