JVC KD-HDR20 - Bluetooth Settings Configuration; Bluetooth Connection and Answer Settings; Microphone and Version Settings

Bluetooth settings
You can change the settings listed on the right column
according to your preference.
1 Select "BT PHONE" or "BT AUDIO."
SRC <tHtil
2 Enter the Bluetooth menu.
W
3 Select "SETTINGS."
II. hi~(
4 Select a setting item.
r-- AUTO CNNCT· • AUTO ANSWER*l ~
L- VERSION -MIC SETTlNG*l-MSG INFO*2.J
*1 Appears only when a Bluetooth phone is
connected.
*2 Appears only when a Bluetooth phone is
connected and it is compatible with text
message.
S Change the setting accordingly.
22
Setting menu (_ : Initial)
• AUTO CNNCT (connect)
When the unit is turned on, the connection is
established automatically with ...
OFF: No Bluetooth device.
LAST: The last connected Bluetooth device.
ORDER: The available registered Bluetooth device
found first.
• AUTO ANSWER
Only for the device being connected for /lBT PHONE./I
ON: The unit answers the incoming calls
automatically.
OFF: The unit does not answer the calls
automatically. Answer the calls manually.
REJECT: The unit rejects all incoming calls.
• MSG INFO (message info)
Only for the device being conne'cted for /lBT PHONE./I
AUTO: The unit informs you of the arrival of
a message by ringing and displaying
/lRCV MSG/I (receiving message).
MANUAL: The unit does not inform you of the arrival
of a message.
• MIC SETTING (microphone setting)
Only for the device being connected for /lBT PHONE."
Adjust the volume of the microphone connected to the
Bluetooth adapter.
LEVEL 01/02/03
• VERSION
The Bluetooth software and hardware versions are
shown.