JVC KD-HDR20 User Manual

Remedies/Causes
"! . Stop playback while driving on rough roads.
• Change the disc.
• Check the cords and connections.
Insert a playable disc into the loading slot.
• Use a disc with MP3IWMA tracks recorded in a format
compliant with ISO 9660 Levell, Level 2, Romeo, or
Joliet.
• Add the extension code <.mp3> or <.wma> to the
file names.
Skip to another track or change the disc. (Do not add the
extension code <.mp3> or <.wma> to non-MP3 or
WMA tracks.)
Do not use too many hierarchical levels and folders.
The playback order is determined when the files are
recorded.
This sometimes occurs during playback. This is caused by
how the tracks are recorded on the disc.
Selected folder is an empty folder *1. Select another
folder that contains MP3IWMA tracks.
This unit can only display letters (upper case), numbers,
and a limited number of symbols.
The unit can be connected with one Bluetooth cellular
phone and one Bluetooth audio device at a time.
While connecting a device, this unit cannot be detected
from another device. Disconnect the currently connected
device and search again.
*1 Folder that is physically empty or folder that contains data but does not contain valid MP3IWMA track.
*2 For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.
Continued on the next page
REFERENCES
31

JVC KD-HDR20 Specifications

General

Brand	JVC
Model	KD-HDR20
Category	Car Receiver
Language	English