Audio cable
VCR
S-Video cable
Using the Audio/S-Video Cable
S-Video carries the video data as two separate signals (brightness and colour),
unlike composite video which carries the entire set of signals in one package.
S-Video does not carry audio. Hence, a separate audio connection is required.
1 Connect the S-Video cable between the S-Video (EXT-4) input jack on TV
and the S-Video output jack on your VCR.
2 Connect the audio cable between the Audio-L/R (EXT-4) input jacks on TV
and the audio output jacks on your VCR.
3 Turn on the TV, and then press the AV button to select EXT-4S.
4 Turn on your VCR, then insert a video cassette into the VCR and press the
PLAY button on your VCR. (Refer to the VCR owner’s manual)
Chapter 2 >> Connecting Your TV
Using the Audio/Video (Composite) Cable
1 Connect the video cable between the Video (EXT-4) input jack on TV and
the video output jack on your VCR.
2 Connect the audio cable between the Audio-L/R (EXT-4) input jacks on TV
and the audio output jacks on your VCR.
3 Turn on the TV, and then press the AV button to select EXT-4.
4 Turn on your VCR, then insert a video cassette into the VCR and press the
PLAY button on the VCR. (Refer to the VCR owner’s manual)
Audio cable
VCR
Video cable
To Next Page
Loading...
